Operations/Work Orders
Work Orders
12 Open • 3 High Priority
Replace Cooling Loop B FilterWO-8924
CRAC-04In ProgressHigh
Sudden pressure drop detected in cooling loop B of CRAC-04. Immediate inspection required to prevent thermal threshold breach.
Calibrate Z-Axis Vibro-SensorWO-8923
CHL-01OpenHigh
Recalibrate the vibration sensor on CHL-01 following repeated high vibration warnings.
Inspect Backup Generator RingsWO-8919
GEN-02OpenMedium
Visual inspection of generator slip rings and brushes to address voltage fluctuation warning.
Compressor Fan Vibration AnalysisWO-8912
CRAC-02OpenHigh
Elevated vibration levels detected on CRAC-02 compressor fan. Perform diagnostic inspection.
PDU-01 Thermal ScanWO-8911
PDU-01OpenMedium
Perform standard thermographic scan on main breaker panels.
UPS-B Cell Capacity CheckWO-8910
UPS-BPending PartsMedium
Run discharge test on cell bank C to inspect potential degradation.
AHU-03 Filter ReplacementWO-8909
AHU-03Open
Scheduled quarterly intake and exhaust filter bag replacement.
GEN-01 Fuel Water Separator ChangeWO-8908
GEN-01In Progress
Water detected in fuel pre-filter. Drain bowl and replace filter element.
CRAC-01 Belt TighteningWO-8907
CRAC-01Open
Inspect belt deflection on primary fan motor and adjust tensioning.
UPS-A Terminal InspectionWO-8906
UPS-AOpenMedium
Clean battery posts and check terminal torque settings.
Chilled Water Pump Seal CheckWO-8905
CHL-05Open
Minor moisture build-up detected near pump drive shaft seal. Monitor leakage rate.
CRAC-10 Return Air Sensor CheckWO-8904
CRAC-10Open
Recalibrate air temperature sensor after transient reading spikes.
Replace Cooling Loop B Filter
In ProgressHigh PriorityID: WO-8924
Created BySystemMay 22, 13:00 UTC
Affected AssetCRAC-04 (Cooling Unit D)Johannesburg DC-1
View Health DashboardAssignee
Sibusiso M.
Due DateToday, 18:00
Description & Scope
Sudden pressure drop detected in cooling loop B of CRAC-04. Immediate inspection required to prevent thermal threshold breach.
Scope of Work (4 actions)
Isolate cooling loop B and drain residual fluid.
Inspect main filter housing for blockages or fractures.
Replace filter element (Part #FLT-9022A).
Re-pressurize and verify flow rate returns to baseline (120 L/min).
Required Parts & Inventory
#FLT-9022AFilter Element
In Stock
Activity Log Timeline
Status updated to In Progress14:30:12 UTC (Today)
By Sibusiso M.Assigned to Sibusiso M.13:15:00 UTC (Today)
By System AdminWork Order Created13:00:05 UTC (Today)
Auto-generated from Alert ALR-8925 due to Critical Severity.